3 Tips for Garage Door Care

While common maintenance is candid, you can hire an expert, or what they call an overhead door technician, if the job is too intimidating. During an inspection, they will highlight indications of deterioration and show you what to look for in the future. If you decide to try the chore on your own, consider these 3 tips from the IDA…

 

1. Lubricate

Garage doors require many moving parts to operate smoothly and accurately. A way to sustain their integrity is by greasing each part. This should include the rollers, hinges, bearings, springs, and chains. The IDA suggests using a drop of engine oil on each roller, which will dispense the lube to the door’s bearings. By lightly greasing the hinges and springs, you lessen the risks of the garage door becoming stiff and of no use. While engine oil is usually a adviseable lubricant, check with the door unit’s manufacturer to find out if there’s a particular fluid they recommend. Some may insist on a silicone lubricant or one made specially for garage door components.

2. Garage Door Balance

1. Close the garage door like normal.

2. Find and engage the release handle to access manual operation.

3. Lift the door three to four feet above the ground. If it doesn’t remain open, there is an imbalance that must be addressed.

While any homeowner can execute testing, a pro should handle the process of rebalancing. It calls for modifying and coordinating the system of springs and can be unsafe if done improperly.

3. Cleaning the Tracks

Ensuring your garage door has a clean track to roll on is important to its optimal effectiveness. You can keep them in top condition by wiping the system with a rag or vacuuming out loose stuff.

So, If you are noticing anything squeaky on your overhead door and need support with any tools, lubricants, or suggestions…Give Euston Hardware a visit today.